2013 Ford Flex Owner Manual Printing 4 - Page 66

Keys and Remote Control 5. Snap the battery cover back onto the transmitter and install the backup key. Memory feature (if equipped) This feature allows you to recall the driver seat, power mirrors and adjustable pedals (if equipped) memory positions. 65 Press the unlock button on the remote control or activate intelligent access (if equipped) to recall memory. The seat and power mirrors automatically move to the memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the ignition is switched out of off (if easy entry feature is enabled). Programming memory to the transmitter To activate this feature: 1. Move the memory features to the desired positions using the associated controls. 2. Press and hold button 1 for five seconds. A tone will sound confirming memory position has 2 1 been set. Continue to hold until a second tone is heard after five seconds. 3. Within three seconds press the lock button on the remote control. 4. Wait 10 seconds, then press the unlock button on the remote control. 5. Repeat this procedure for memory button 2 and another transmitter if desired. Deactivating memory from the transmitter To deactivate this feature: 1. Press and hold either the 1 or 2 button for five seconds. A tone will sound when the memory store is done. Continue to hold until a second tone is heard. 2. Within three seconds press the unlock button on the remote control. 3. Repeat this procedure for each additional transmitter if desired. 2013 Flex (471) Owners Guide gf, 4th Printing, December 2012 USA (fus)