2013 Ford Transit Connect Passenger Owner Manual Printing 2 - Page 242

Wheels and Tires Stowing the flat/spare tire Note: Failure to follow spare tire stowage instructions may result in failure of cable or loss of spare tire. 241 1. Lay the tire on the ground with the valve stem facing up toward the vehicle. 2. Slide the wheel partially under the vehicle and install the retainer through the wheel center. Pull on the cables to align the components at the end of the cables. 3. Attach the second cable by screwing the bolt into one of the holes in the wheel. 4. Turn the end of the first cable so it fits through the slot and install the cable. Then slide the cap over the retainer. 5. Turn the lug wrench clockwise until the tire is raised to its stowed position underneath the vehicle. The effort to turn the jack handle increases significantly and the spare tire carrier ratchets or slips when the tire is raised to the maximum tightness. Tighten to the best of your ability, to the point where the ratchet/slip occurs, if possible. The spare tire carrier will not allow you to overtighten. If the spare tire carrier ratchets or slips with little effort, take the vehicle to your authorized dealer for assistance at your earliest convenience. 6. Check that the tire lies flat against the frame and is properly tightened. Try to push or pull, then turn the tire to be sure it will not move. Loosen and retighten, if necessary. Failure to properly stow the spare tire may result in failure of the winch cable and loss of the tire. 7. Repeat this tightness check procedure when servicing the spare tire pressure (every six months, per scheduled maintenance information), or at any time that the spare tire is disturbed through service of other components. Return the jack and tools to the storage position in the cargo area. Electric vehicles For specific information on the Transit Connect Electric, refer to the Azure Dynamics TC-E Owner's Guide Supplement. 2013 Transit Connect (tst) Owners Guide gf, 2nd Printing, November 2012 USA (fus)