2013 Ford Transit Connect Passenger Owner Manual Printing 2 - Page 65

64 Security 4. Remove the previously programmed coded key from the ignition. 5. After three seconds but within 10 seconds of removing the previously programmed coded key, insert the other previously programmed coded key into the ignition. 6. Turn the ignition from off on. Keep the ignition on for at least one second but not more than 10 seconds. 7. Turn the ignition off. 8. Remove the previously programmed coded key from the ignition. 9. After three seconds but within 20 seconds of removing the previously programmed coded key, insert the unprogrammed key into the ignition. 10. Turn the ignition from off to on. Keep the ignition on for at least one second, but no more than 10 seconds. 11. Your new, unprogrammed key is now programmed. If the key has been successfully programmed it will start the vehicle's engine and the theft indicator light will illuminate for three seconds and then go out. If the key was not successfully programmed, it will not start your vehicle's engine and the theft indicator light will flash on and off, or stay on for more than three seconds. If failure repeats, bring your vehicle to your authorized dealer to have the new key programmed. To program an additional new unprogrammed key, repeat this procedure from Step 1 for each additional key. 2013 Transit Connect (tst) Owners Guide gf, 2nd Printing, November 2012 USA (fus)