2014 Ford Fiesta Owner Manual Printing 2 - Page 32
2014 Ford Fiesta Manual
Page 32 highlights
Safety Belts How to Use the Automatic Locking Mode Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing on the label. Also, use the safety belt extension only if the safety belt is too short for you when fully extended. SAFETY BELT HEIGHT ADJUSTMENT WARNING E142591 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to Disengage the Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Position the safety belt height adjuster so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a crash. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder. Safety Belt Extension Assembly E145664 WARNING Do not use extensions to change the fit of the shoulder belt across the torso. If the safety belt is too short when fully extended, a safety belt extension assembly can be obtained from an authorized dealer. To adjust the shoulder belt height: 1. Pull the button and slide the height adjuster up or down. 2. Release the button and pull down on the height adjuster to make sure it is locked in place. 29 Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013