2014 Ford Mustang Owner Manual Printing 2 - Page 124

Climate Control 123 • To improve the air conditioning cool down, drive with the windows slightly open for 2-3 minutes after start-up or until you have aired out the vehicle. • You may feel a small amount of air from the floor vent regardless of the air distribution setting you select. During extreme high ambient temperatures when idling stationary for extended periods in gear, run the air conditioning in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle's transmission into position P (automatic transmission) to continue to receive cool air from your air conditioning system. For maximum cooling performance in AUTO mode, press MAX A/C. For maximum cooling performance in manual override control: 1. Choose the Panel, A/C, and recirculated air controls. 2. Set the temperature to LO. 3. Set the fan to the highest blower setting. To aid in side window defogging and demisting in cold or humid weather: 1. Select Floor/Panel. 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents toward the side windows. 6. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The vehicle must be running to use this feature. Press the control to clear the rear window of thin ice and fog. Press the control again within 15 minutes to switch it off. It turns off automatically after approximately 15 minutes, or when you switch off the ignition. Do not use razor blades or other sharp objects to clean the inside of the rear window or to remove decals from the inside of the rear window. This may cause damage to the heated grid lines. Your warranty does not cover this damage. 2014 05+ Mustang (197) Owners Guide gf, 2nd Printing, May 2013 USA (fus)