2015 Ford Escape Owner Manual Printing 1 - Page 53

Keys and Remote Controls Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should operate normally. The remote control uses one coin-type three-volt lithium battery CR2032 or equivalent. Integrated Keyhead Transmitter E142432 2. Twist a thin coin under the tab hidden behind the backup key head to remove the battery cover. Do not use the backup key to remove the cover or you could damage the intelligent access key. E138619 1. Twist a thin coin in the slot of the transmitter near the key ring to remove the battery cover. 2. Remove the old battery. E138622 3. Remove the old battery. 4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key. E138620 3. Insert the new battery. Refer to the instructions inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing. 4. Snap the battery cover back onto the transmitter. Intelligent Access Transmitter 1. Remove the backup key from the transmitter. Car Finder Press the button twice within three seconds. The horn will E138623 sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. 50 Escape (TM2), enUSA, First Printing