2015 Ford Escape Owner Manual Printing 1 - Page 57
2015 Ford Escape Manual
Page 57 highlights
MyKey™ 1. Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, hold the intelligent access key next to the steering column. Details on the correct fob placement and position is in another chapter. See Starting and Stopping the Engine (page 125). 2. Switch the ignition on. 3. Access the main menu on the information display controls, and select Settings and then MyKey by pressing OK or the > button. 4. Press OK or the > button to select Create MyKey. 5. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at your vehicle's next start. MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys. You can also program configurable settings for the key(s). Refer to Programming/Changing Configurable Settings. Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings: Switch the ignition on using an admin key or fob. 2. Access the main menu on the information display controls, and select Settings, then MyKey by pressing OK or the > button. 3. Use the arrow buttons to get to a configurable feature. 4. Press OK or > to make a selection. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings. 1. CLEARING ALL MYKEYS You can clear or change your MyKey settings using the information display control on the steering wheel. See Information Displays (page 90). Switch the ignition on using an admin key or fob. To clear all MyKeys of all MyKey settings, press the left arrow button to access the main menu and scroll to: Message Action and Description Settings MyKey Clear MyKey All MyKeys Cleared Press the OK button. Press the OK button. Press and hold the OK button until the following message displays. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status. 54 Escape (TM2), enUSA, First Printing