2015 Ford Mustang Owner Manual Printing 1 - Page 227

Maintenance 5. Locate the vertical adjuster on each headlamp. Use a Phillips #2 screwdriver to turn the adjuster either clockwise or counterclockwise to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line. 6. Repeat Steps 3 through 7 to adjust the other headlamp. 7. Close the hood and turn off the lamps. If any of the above conditions of unacceptable moisture are present, contact an authorized. Replacing HID Headlamp Bulbs Your vehicle has high intensity discharge lamps. These lamps operate at a high voltage. Contact an authorized dealer. Accessing the Direction Indicator and Fog Lamp Bulbs 1. Rotate the steering wheel to the opposite side of the bulb needing replacement. Horizontal Aim Adjustment Horizontal aim is not required for this vehicle and is not adjustable. CHANGING A BULB Lamp Assembly Condensation Exterior lamps have vents to accommodate normal changes in pressure. Condensation can be a natural occurrence of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur in cold temperatures. When normal condensation occurs, a thin film of mist can form on the interior of the lens. The mist eventually clears and exits through the vents during normal operation. Clearing time may take as long as 48 hours under dry weather conditions. Examples of acceptable condensation are: • Thin mist without streaks, drip marks or droplets. • Fine mist that covers less than 50% of the lens. Examples of unacceptable moisture are: • Water puddle inside the lamp. • Large water droplets, drip marks or streaks on the interior of the lens. E176616 E159695 2. Remove the three wheel liner fasteners. 3. Locate the most outside fastener attaching the front fascia to the wheel liner and remove it. 224 Mustang (), enUSA, First Printing