2015 Ford Transit Connect Passenger Owner Manual Printing 1 - Page 63
2015 Ford Transit Connect Passenger Manual
Page 63 highlights
Security 1. 2. Insert the first previously programmed correctly coded key into the ignition. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. Switch the ignition off and remove the first correctly coded key from the ignition. After three seconds but within 10 seconds of switching the ignition off, insert the second previously correctly coded key into the ignition. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. Switch the ignition off and remove the second previously programmed correctly coded key from the ignition. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed correctly coded key, insert the new unprogrammed key into the ignition. Switch the ignition from off to on. Keep the ignition on for at least six seconds. Remove the newly programmed correctly coded key from the ignition. 3. 4. 5. 6. 7. 8. 9. If the key has been successfully programmed it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If the key was not successfully programmed, wait 10 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to an authorized dealer. Note: You can program a maximum of eight coded keys to your vehicle. All eight can be integrated keyhead transmitters. 60 Transit Connect (CHC) Canada/United States of America, enUSA, First Printing