2015 Ford Transit Connect Passenger Owner Manual Printing 1 - Page 68
2015 Ford Transit Connect Passenger Manual
Page 68 highlights
Wipers and Washers Note: During wet or winter driving conditions with ice, snow or a salty road mist, inconsistent or unexpected wiping or smearing may occur. In these conditions, you can do the following: • Lower the sensitivity of the autowipers to reduce the amount of smearing on the windshield. • Switch to normal or high-speed wipe. • Switch autowipers off. Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield. WINDSHIELD WASHERS Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat. Note: Do not operate the washers for more than 10 seconds at a time. A B C E167119 E129188 To use the washer, pull the lever toward you. High sensitivity On Low sensitivity When you release the lever, wiping will continue for a short period of time. A B C Note: Some autowiper levers may include a letter "A" within the icon. Autowipers uses a rain sensor located in the area around the interior mirror. The rain sensor monitors the amount of moisture on the windshield and automatically turns the wipers on. It will adjust the wiper speed by the amount of moisture that the sensor detects on the windshield. Use the rotary control to adjust the sensitivity of the autowipers. When you select low sensitivity, the wipers will operate when the sensor detects a large amount of water on the windshield. When you select high sensitivity, the wipers will operate when the sensor detects a small amount of water on the windshield. 65 REAR WINDOW WIPER AND WASHERS Rear Window Wiper Note: Make sure you switch the rear window wiper and ignition off before using an automatic car wash. Transit Connect (CHC) Canada/United States of America, enUSA, First Printing