1997 Honda Accord Owner's Manual - Page 177

Cooling System RESERVE TANK DRAIN PLUG RESERVE TANK CAP RESERVE TANK RESERVE TANK CAP 6 cylinder models 6 cylinder models DRAIN BOLTS 4 cylinder models HOLDER 6 cylinder models HOLDER 3. Loosen the drain plug on the bottom of the radiator. The coolant will drain through the splash guard. Remove the drain bolts and washers from the engine block. 4. Remove the reserve tank from its holder by pulling it straight up. Drain the coolant, then put the tank back in its holder. 5. When the coolant stops draining, tighten the drain plug in the bottom of the radiator. Put new washers on the drain bolts, then reinstall the drain bolts in the engine block. Tighten them securely. Tightening torque: 4 cylinder models 83 N.m (8.5 kgf.m , 61 Ibf.ft) 6 cylinder models 10 N.m (1.0 kgf.m, 7 Ibf.ft) Maintenance