1998 Honda CR-V Owner's Manual - Page 201

Cooling System 9. Start the engine and let it run until it warms up (for about 30 seconds). 10.Turn off the engine. Check the level in the radiator, add coolant if needed. 14.Remove the radiator cap. 15.Pour coolant into the radiator up to the base of the filler neck and into the reserve tank up to the MAX mark. 16.Start the engine and hold it at 1,500 rpm. Check the coolant level in the radiator and add coolant if needed. 11.Fill the reserve tank to the MAX mark. Install the reserve tank cap. 12.Install the radiator cap, and tighten it to the first stop. 13.Start the engine and let it run until it warms up (the radiator cooling fan comes on at least twice). And then stop the engine. 17.Install the radiator cap, and tighten it fully. 18.If necessary, fill the reserve tank to the MAX mark. Install the reserve tank cap. RESERVE TANK Maintenance