1998 Honda CR-V Owner's Manual - Page 233
1998 Honda CR-V Manual
Page 233 highlights
Lights 5. Install the new bulb in the socket. 6. Insert the socket back into the rear side marker light assembly. Turn it clockwise to lock it in place. 7. Test the lights to make sure the new bulb is working. 8. Put the mudguard back in place and secure it with the three screws. Replacing a High-mount Brake Light Bulb 1. Remove the light assembly cover by pushing the tabs on both sides and pulling the cover down. 2. Remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Test the lights to make sure the new bulb is working. 5. Put the socket back into the light assembly and turn it clockwise to lock it in place. 6. Put the cover back onto the light assembly. Push it up until it locks in place. Maintenance