2006 Honda Accord Owner's Manual - Page 130

Playing a Tape (U.S. Vehicles) To Play a Tape Optional on all U.S. models The ignition switch must be in ACCESSORY (I) or ON (II). Make sure the open side of the tape is facing right, then insert the tape most of the way into the slot. The system will pull the tape in the rest of the way, and begin to play it. The tape direction indicator will light to show you which side of the tape is playing. The indicates the side you inserted upward in now playing. If you want to play the other side, press the Preset 3 (PLAY/PROG) side of the preset bar or press the AUDIO DISPLAY button and touch the PROG icon. When the player reaches the end of the tape, it will automatically reverse direction and play the other side. Dolby noise reduction turns on when you insert a tape. The indicator will light in the display. If the tape was not recorded in Dolby, turn it off by pressing the Preset 4 (NR) side of the preset bar or touching the NR icon. Dolby remains off until you press the preset bar or the icon again. Dolby noise reduction manufactured under license from Dolby laboratories licensing Corporation. ''Dolby'' and the double-D symbol are trademarks of the Dolby Laboratories Licensing Corporation. To Stop Playing a Tape To remove the tape, press the EJECT button on the cassette player. If you want to turn the player off, press the PWR/VOL knob or turn off the ignition. The tape will remain in the drive. When you turn the system back on, the tape player will be in pause mode. Press the Preset 3 (PLAY/PROG) side of the preset bar or touch the PROG icon on vehicles with navigation system to resume play. To switch to the radio or CD player while a tape is playing, press the AM/FM, or CD/AUX button or CD/ AUX XM button. To change back to the tape player, push the CD/AUX button or CD/AUX XM button. 132