2006 Honda Accord Owner's Manual - Page 202

Changing the Oil and Filter Always change the oil and filter according to the maintenance minder (see page 193 ). The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled mechanic. 1. Run the engine until it reaches normal operating temperature, then shut it off. WASHER OIL DRAIN BOLT OIL DRAIN BOLT WASHER 4-cylinder models 6-cylinder models 2. Open the hood, and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container. 3. Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required. 4. Check the oil filter to make sure its gasket did not stick to the engine block. A stuck gasket could cause an oil leak. 206