2007 Honda Accord Owner's Manual - Page 42
2007 Honda Accord Manual
Page 42 highlights
Protecting Infants and Small Children, Selecting a Child Seat If it is necessary to put a forwardfacing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat. Selecting a Child Seat When buying a child seat, you need to choose either a conventional child seat, or one designed for use with the lower anchors and tethers for children (LATCH) system. Conventional child seats must be secured to a vehicle with a seat belt, whereas LATCH-compatible seats are secured by attaching the seat to hardware built into the two outer seating positions in the back seat. Since LATCH-compatible child seats are easier to install and reduce the possibility of improper installation, we recommend selecting this style. We also recommend selecting a LATCH-compatible seat with a rigid, rather than a flexible, anchor (see page 44 ). In seating positions and vehicles not equipped with LATCH, a LATCHcompatible child seat can be installed using a seat belt. Whatever type of seat you choose, to provide proper protection, a child seat should meet three requirements: 1. The child seat should meet U.S. or Canadian Motor Vehicle Safety Standard 213. Look for FMVSS Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates. If you must place a forwardfacing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child. 213 or CMVSS 213 on the box. 2. The child seat should be of the proper type and size to fit the child. Rear-facing for infants, forwardfacing for small children. 42