2008 Honda Pilot Owner's Manual - Page 260

Main Menu Table Of Contents Lights Replacing a Side Turn Signal Bulb 5. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 6. Insert the socket back into the turn signal assembly. Turn it clockwise to lock it in place. BULB CLIPS SOCKET 7. Turn on the lights to make sure the new bulb is working. 8. Put the inner fender cover in place. Install the three holding clips. Lock each clip in place by pushing on the center. 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the three holding clips from the inner fender. 3. Pull the inner fender cover away from the fender. 4. Remove the socket from the turn signal assembly by turning it onequarter turn counterclockwise. 256 2008 Pilot