2008 Honda Pilot Owner's Manual - Page 263
2008 Honda Pilot Manual
Page 263 highlights
Main Menu Table Of Contents Lights 3. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. 5. Turn on the lights to make sure the new bulb is working. 6. Reinstall the back-up light cover. SCREWS SOCKET BULB Replacing the High-mount Brake Light Maintenance 1. Place a cloth on the middle edge of a part of the lens on the passenger's side. Remove a part of the lens by carefully prying on its edge with a small flip tipped screwdriver. 2. Use a Phillips-head screwdriver to remove the screw under the lens. 3. Pull the light assembly out of the tailgate. 4. Remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 5. Pull the bulb straight out of its socket. Push a new bulb into the socket until it bottoms. Reinstall the assembly. 259 2008 Pilot