2009 Honda Civic Owner's Manual - Page 125

Main Menu Table Of Contents Audio System (Models without navigation system) SCAN The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again. You can store up to 12 Preset preset channels using each side of the preset button. Each side of the button stores one channel from the XM1 band and one channel from the XM2 band. To store a channel: 1. Press the AUX button. Either XM1 or XM2 will show in the display. 2. Use the tune, seek, or scan function to tune to a desired channel. In category mode, only channels within that category can be selected. In channel mode, all channels can be selected. 3. Pick a preset number you want for that channel. Press and hold the button until you hear a beep. 4. Repeat steps 2 and 3 to store the first six channels. 5. Press the AUX button again. Store the next six channels using steps 2 and 3. Once a channel is stored, press and release the proper side of the preset button to tune to it. XM Radio Display Messages ''LOADING'' XM is loading the audio or program information. ''OFF AIR'' The channel currently selected is no longer broadcasting. ''UPDATING'' The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally. ''NO SIGNAL'' The signal is currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon. 122 2009 Civic Sedan