2006 Hummer H2 Owner's Manual - Page 308

Power Winch Platform You can use the power winch platform (if equipped) with an aftermarket winch. Connect the winch to the platform and wiring to the vehicle following the winch manufacturer's guidelines. Notice: Do not use the winch platform to winch at a tension of more than 9,000 lbs. (4 082 kg). This would damage your vehicle's frame. This damage would not be covered by your vehicle's warranty. If you are using a winch to pull out another vehicle, follow the winch manufacturer's guidelines and observe the following to prevent damage to your vehicle: Notice: Using a power winch with the transmission in gear to pull out another vehicle may damage the transmission. When operating a power winch, always leave the transmission in NEUTRAL (N). Notice: Driving your vehicle through an automatic car wash with the winch installed, can cause damage to your vehicle and the car wash. Always remove the winch from your vehicle before using an automatic car wash. See Washing Your Vehicle on page 5-109 for more information. If you are using a winch to pull out your own vehicle, follow the winch manufacturer's guidelines for self recovery and observe the following to prevent damage to your vehicle: • If possible, have your vehicle anchored from the opposite side of the winch to a solid, immovable object. If winching from the front, use both of the rear recovery loops. If winching from the rear, use both of the front recovery loops. • Do not self recover your vehicle by wrapping the winch cable around an object (such as a pulley block or tree) and attaching it back to your vehicle's recovery loops. • Always attach the winch cable directly to a solid anchor directly in front of your vehicle to achieve a straight line pull. • Put your transmission in NEUTRAL (N). • Use your regular brakes to hold your vehicle in place and block the wheels to keep the vehicle from moving. 4-54