2006 Hummer H2 Owner's Manual - Page 378

Front Turn Signal and Parking Lamps To replace a front turn signal or parking lamp bulb, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Locate the bulb you need to change. 3. Turn the bulb socket counterclockwise and remove it from the lamp housing. Daytime Running Lamps (DRL) To replace a daytime running lamp bulb, do the following: 1. Locate the lamp assembly behind the front bumper. It is easiest to come in from the side of the vehicle through the wheel opening. 2. Turn the bulb socket counterclockwise and remove it from the lamp housing. 3. Remove the bulb from the bulb socket. 4. Pull the bulb from the bulb socket. 5. Install the new bulb into the bulb socket. 6. Reinstall the bulb socket into the lamp housing and turn it clockwise until it locks. 4. Install the new bulb into the bulb socket. 5. Reinstall the bulb socket into the lamp housing and turn it clockwise until it locks. 5-48