2006 Hummer H3 Owner's Manual - Page 317

2. Remove the two screws from the taillamp assembly. 5. Replace with a new bulb. 6. Insert the bulb into the taillamp housing and turn it counterclockwise until it is locked into place. 7. Reinstall the rear lamp assembly by lining up the locator tabs with the holes in the vehicle's frame. 8. Reinstall the two screws. Replacement Bulbs Exterior Lamp Passenger's Side Shown 3. Remove the taillamp assembly by pulling it gently to release the two locator tabs. The locator tabs connect the taillamp assembly to the vehicle's frame. 4. Turn the bulb socket counterclockwise to remove it from the taillamp housing. Back-up Lamp, Stoplamp, Taillamp and Turn Signal Lamp Low-Beam and High-Beam Headlamp Bulb Number 3157K H13 For replacement bulbs not listed here, contact your dealer. 5-51