2006 Hummer H3 Owner's Manual - Page 350

Spare Tire Your vehicle, when new, had a fully-inflated spare tire. A spare tire may lose air over time, so check its inflation pressure regularly. See Inflation - Tire Pressure on page 5-60 and Loading Your Vehicle on page 4-52 for information regarding proper tire inflation and loading your vehicle. For instruction on how to remove, install or store a spare tire, see Changing a Flat Tire on page 5-73 and Removing the Flat Tire and Installing the Spare Tire on page 5-77. After installing the spare tire on your vehicle, you should stop as soon as possible and make sure the spare is correctly inflated. Have the damaged or flat road tire repaired or replaced as soon as you can and installed back onto your vehicle. This way, a spare tire will be available in case you need it again. Your vehicle may have a different size spare tire than the road tires that were originally installed on your vehicle. This spare tires was developed for use on your vehicle, so it's all right to drive on it. If your vehicle has a spare tire that does not match your vehicle's original road tires and wheels in size and type, do not include the spare in the tire rotation. 4. Reinstall the wing nut retainer to fasten the jack and tool bag in the storage compartment. Make sure that the wing nut passes through the tool bag and the jack before you tighten it. 5. Turn the wing nut retainer clockwise to secure. 6. Reinstall the compartment cover by inserting the locator tabs in the holes in the swing-gate. Push the latches down to secure. 5-84