2007 Hummer H3 Owner's Manual - Page 364

3. Pull the taillamp assembly away from the vehicle. 4. Turn the bulb socket counterclockwise to remove it from the taillamp assembly. 5. Holding the socket, pull the old bulb to release it from the socket. 6. Push the new bulb into the socket until it clicks. 7. Insert the bulb socket into the taillamp assembly and turn it clockwise to secure. 8. Reinstall the taillamp assembly by lining up the locator pins with the retainers in the vehicle's body. 9. Reinstall the two screws and tighten. 10. Close the swing-gate. License Plate Lamp To replace one of these bulbs, do the following: 1. Reach under the bumper for the bulb socket. 2. Remove the two screws holding the license plate lamp. 3. Pull the license plate lamp away from the fascia. 364