2007 Infiniti M45 Owner's Manual - Page 300

PUSH STARTING CAUTION Always connect positive (+) to positive (+) and negative (−) to body ground (for example, strut mounting bolt, engine lift bracket, etc.) - not to the battery. Make sure the jumper cables do not touch moving parts in the engine compartment and that clamps do not contact any other metal. 6. Start the engine of the booster vehicle A k and let it run for a few minutes. 7. Keep the engine speed of the booster A vehicle k at about 2,000 rpm, and start your engine of the jumped veB hicle k in the normal manner. 8. After starting your engine, carefully disconnect the negative cable and 4 3 then the positive cable (k → k → 2 1 k → k). 9. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover the vent holes as it may be contaminated with corrosive acid. 10. Put the battery cover and the engine compartment cover on. Do not attempt to start the engine by pushing. CAUTION Automatic transmission models cannot be push started. Attempting to do so may cause transmission damage. If needed, Roadside Assistance is available. Please see your Warranty Information Booklet or Roadside Assistance I.D. Card for the toll-free number to call (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada). CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, push the ignition switch to the LOCK position and wait 10 seconds before trying again. 6-10 In case of emergency