2007 Infiniti M45 Owner's Manual - Page 336

SDI1874 SDI1649 REPLACING Replace the wiper blades if they are worn. 1. Push the ignition switch to the ON position and the windshield wiper switch ON. Push the ignition switch to the LOCK position when the wiper is in the fully up position. The wiper will stop as illustrated. The wiper should be in the fully up position to avoid scratching the engine hood or wiper arm. 2. Pull the wiper arm. A 3. Push the release tab k , and then move the wiper blade down the wiper 1 arm k while pushing the release tab to remove. otherwise it may be damaged when the hood is opened. Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure. Worn windshield wiper blades can damage the windshield and impair driver vision. 4. Insert the new wiper blade onto the wiper arm until a click sounds. CAUTION After wiper blade replacement, return the wiper arm to its original position; 8-24 Maintenance and do-it-yourself