2007 Infiniti M45 Owner's Manual - Page 42

A child restraint with a top tether strap should not be used in the front passenger seat. The instructions in this section apply to child restraint installation using the vehicle seat belts in the rear seat or the front passenger seat. the front seat, it should be placed in a front-facing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. 3. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. The back of the child restraint should be secured against the seatback. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. See "Head restraint adjustment" in this section. If the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. Front-facing Front facing (front passenger seat) - step 2 SSS0640 Follow these steps to install a front-facing child restraint using the vehicle seat belt in the rear seat or in the front passenger seat: 1. If your vehicle is equipped with rear power seat adjustment, adjust the rear outboard seats to the uplight and rearmost position. Do not move the rear outboard seats with the child restraints attached to them. 2. If you must install a child restraint in 1-26 Safety - Seats, seat belts and supplemental restraint system