2008 Infiniti QX56 Owner's Manual - Page 104
2008 Infiniti QX56 Manual
Page 104 highlights
Transfer 4LO position indicator ( model) This indicator illuminates when the 4WD shift switch is set in the 4LO position with the ignition key in the ON position. If the 4WD shift switch is set in the 4LO position and the indicator blinks, stop the vehicle, drive slowly forward and the indicator will turn on. When you shift between 4H and 4LO, stop the vehicle, move the automatic transmission selector lever to the N (Neutral) position, then depress and turn the 4WD shift switch to 4LO or 4H. The transfer case may be damaged if you shift the switch while driving. You cannot move the transfer 4WD shift switch between 4H and 4LO unless you have first stopped the vehicle and moved the automatic transmission shift selector lever to N (Neutral). Make sure the transfer 4LO position indicator illuminates when you shift the 4WD shift switch to 4LO. The indicator may blink while shifting from one drive mode to the other. Automatic transmission position indicator When the ignition key is placed in the ON position, this indicator shows the automatic transmis- sion shift selector lever position. See "Driving the vehicle" in the "Starting and driving" section of this manual. Cruise main switch indicator This indicator illuminates when the cruise control main switch is pushed. The indicator turns off when the main switch is pushed again. When the cruise main switch indicator illuminates, the cruise control system is operational. Cruise set switch indicator This indicator illuminates while the vehicle speed is controlled by the cruise control system. If the indicator blinks while the engine is running, it may indicate the cruise control system is not functioning properly. Have the system checked by an INFINITI dealer. Intelligent Cruise Control (ICC) system main switch indicator (if so equipped) This indicator is displayed when the Intelligent Cruise Control (ICC) system main switch is pushed. When the main switch is pushed again, the indicator turns off. While the main switch indicator is displayed, the ICC system is operational. Intelligent Cruise Control (ICC) system set switch indicator (if so equipped) This indicator is displayed while the vehicle speed is controlled by the Intelligent Cruise Control (ICC) system. If the indicator blinks while the engine is running, it may indicate that the ICC system is not functioning properly. Have the system checked by an INFINITI dealer. See Intelligent Cruise Control (ICC) system in the "Starting and driving" section for details. Parking brake warning This warning illuminates when the parking brake is set and the vehicle is driven. Low fuel warning This warning illuminates when the fuel level in the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches E (Empty). There will be a small reserve of fuel in the tank when the fuel gauge needle reaches E (Empty). Low windshield washer fluid warning This warning illuminates when the windshield washer fluid is at a low level. Add windshield washer fluid as necessary. See "Window washer fluid" in the "Maintenance and do-it-yourself" section of this manual. 2-22 Instruments and controls