2008 Infiniti QX56 Owner's Manual - Page 373

LIGHTS Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. HEADLIGHTS Replacing the xenon headlight bulb (Low-beam) If replacement is required, see an INFINITI dealer. CAUTION ● High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. ● When handling the bulb, do not touch the glass envelope. ● DO NOT TOUCH THE BULB WITH BARE HANDS. ● Use the same number and wattage as originally installed: Low beam: Wattage: 35 Bulb no.: D2R* High beam: Wattage: 60 Bulb no.: 9005* *: Always check with the Parts Department at an INFINITI dealer for the latest parts information. ● Do not leave the bulb out of the headlight reflector for a long period of time as dust, moisture and smoke may enter the headlight body and affect the performance of the headlight. WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI dealer. For additional information, see "Headlight and turn signal switch" in the "Instruments and controls" section. Replacing the halogen headlight bulb (High-beam) The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. Because the headlight assembly must be removed from the vehicle for bulb replacement, see your INFINITI dealer. Maintenance and do-it-yourself 8-27