2008 Infiniti QX56 Owner's Manual - Page 307

The preset speed can be cancelled using any of these methods: ● Push the CANCEL button. The SET indicator light will go out. ● Tap the brake pedal. The SET indicator light will go out. ● Turn the ON/OFF switch off. Both the CRUISE indicator and SET indicator lights will go out. To reset at a faster cruising speed, use one of the following three methods: ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. ● Push and hold the ACCEL/RES set switch. When the vehicle attains the speed you desire, release the switch. ● Push, then quickly release the ACCEL/RES switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h). To reset at a slower cruising speed, use one of the following three methods: ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. ● Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. ● Push, then quickly release the COAST/SET switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the ACCEL/RES switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h). Automatic cancellation A chime sounds under the following conditions and the control is automatically canceled. ● When the vehicle slows down more than 8 MPH (13 km/h) below the set speed. ● When the vehicle speed falls below approximately 20 MPH (32 km/h). ● When the selector lever is shifted to a position other than D (Drive). ● When the parking brake is applied. ● When the VDC operates (except ABS, which is functional with ICC system operation). WSD0222 Warning light When the system is not operating properly, the chime sounds and the orange system warning light will illuminate in the instrument panel. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off restart the engine, resume driving and then perform the setting again. If it is not possible to set or the indicator stays on, it may indicate that the system is malfunctioning. Although the vehicle is still driveable under normal conditions, have the vehicle checked at an INFINITI dealer. Starting and driving 5-35