2005 Jeep Liberty Owner's Manual - Page 175

UNDERSTANDING YOUR INSTRUMENT PANEL 175 24. O/D (Overdrive) Off Indicator Light This light will illuminate when the O/D OFF button has been selected. The O/D OFF button is located on the gear shift lever. 25. Seat Belt Indicator Light When the ignition switch is first turned ON, this light will turn on for 5 to 8 seconds as a bulb check. During the bulb check, if the driver's seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt Warning Light will flash or remain on continuously. Refer to Enhanced Driver Seat Belt Reminder System (BeltAlert) in the Occupant Restraints section for more information. 26. Light Bar Indicator Light - If Equipped This light indicates when the light bar lamps are on. 27. Water In Fuel Warning Light - If Equipped This light indicates water has collected in the fuel filter and should be drained immediately. See your authorized dealer for service. (See page 220 for more information.) 28. Low Coolant Warning Light - If Equipped This light comes on if the coolant level is low. This light will come on for 3 seconds as a bulb check when the ignition switch is first turned to the ON position. 29. Electronic Throttle Control (ETC) Warning Light - If Equipped This light informs you of a problem with the Electronic Throttle Control system. If a problem is detected the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the gear selector is placed in the P (Park) position. The light should turn 4