2007 Jeep Compass Owner's Manual - Page 175

UNDERSTANDING YOUR INSTRUMENT PANEL 175 28. Electronic Stability Program (ESP) Indicator Light The malfunction lamp for the ESP is combined with BAS. The yellow "ESP/BAS Warning Lamp" comes on when the ignition switch is turned to the "ON" position. They should go out with the engine running. If the "ESP/BAS Warning Lamp" comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible. 29. 4WD Malfunction Light This light monitors the Four -Wheel-Drive (4WD) system. The light will come on, for a bulb check, when the ignition key is turned to the ON position and may stay on for as long as 3 seconds. When lit solid: There is an 4WD system fault. 4WD performance will be at a reduced level. Service the 4WD system soon. When blinking: The 4WD system is temporarily disabled due to overload condition. 30. Electronic Vehicle Information Center Display-If Equipped When the appropriate conditions exist, this display shows the Electronic Vehicle Information Center (EVIC) messages. 31. Electronic Vehicle Information Center (EVIC) Button-If Equipped Pushing this button, will change the display to the choices available for EVIC. 4