2011 Jeep Liberty Owner Manual - Page 20

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM - IF EQUIPPED The Vehicle Security Alarm monitors the vehicle doors, liftgate, and liftgate flipper glass for unauthorized entry and ignition for unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for door locks and flipper glass are disabled. one should go off in the future, you will need to know which mode has been activated in order to deactivate it. Rearming Of The System If something triggers the Vehicle Security Alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of If something triggers the alarm, the Vehicle Security the visual signals after 15 minutes, and then the Vehicle Alarm will sound the horn intermittently, the headlights, Security Alarm will rearm itself. park lamps and/or turn signals and the Vehicle Security To Arm The System Light in the instrument cluster will flash for three minutes. If the disturbance is still present (driver's door, 1. Remove the key from the ignition switch and exit the passenger door, other doors, ignition) after three minutes, vehicle. the headlights, park lamps and/or turn signals will flash 2. Lock the doors and liftgate by pressing the power door for an additional 15 minutes. LOCK switch or the LOCK button on the Remote Keyless NOTE: The Panic and Security alarms are quite differ- Entry (RKE) transmitter. ent. Please take a moment to activate the Panic and the NOTE: The Vehicle Security Alarm will not arm if you Security modes to hear the differences in the horn. In case lock the doors with the manual door lock plungers or the driver's door lock cylinder.