2011 Jeep Liberty Owner Manual - Page 353

STARTING AND OPERATING 351 control, the accelerator pedal will increase vehicle speed The "Hill Descent" button is located in the lower switch in the usual manner. When either the brake or the bank below the climate control. accelerator is released, HDC will control the vehicle at the original set speed. NOTE: HDC is available on vehicles equipped with the MP1522 transfer case. • The transfer case must be in 4WD LOW range to enable HDC. • HDC is enabled only when the "Hill Descent Control Indicator Light" in the instrument cluster is on solid. • HDC will NOT activate when the automatic transmission is in PARK. • HDC will NOT activate on level ground. Hill Descent Button 5 Enabling HDC • HDC will NOT activate at vehicle speeds above 1. Shift the transfer case into 4WD LOW range. Refer to 30 mph (50 km/h). "Four-Wheel Drive Operation" in "Starting and Operating" for further information.