2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Owners Manual - Page 87

2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Manual

Page 87 highlights

MAINTENANCE AND ADJUSTMENT 85 Engine Oil In order for the engine to function properly, maintain the engine oil at the proper level, and change the oil and oil filter in accordance with the Periodic Maintenance Chart. Not only do dirt and metal particles collect in the oil, but the oil itself loses its lubricative quality if used too long. the vehicle on level ground. • Park Pull up dipstick out of the dipstick tube, wipe it • dry, andthe insert it into the tube securely. żIt is necessary to insert the dipstick with its groove mark facing upwards to measure the correct amount of oil. NOTE j WARNING Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Check the oil level before each use and change the oil and filter according to the periodic maintenance chart in the owner's manual. Oil Level Inspection the oil has just been changed, start the engine • If and run it for several minutes at idle speed. This fills the oil filter with oil. Stop the engine, then wait several minutes until the oil settles. A. Dipstick B. Groove Mark C. Rear Seat NOTICE Racing the engine before the oil reaches every part can cause engine damage. the vehicle has just been used, wait several min• If utes for all the oil to drain down. żIf the vehicle is in 2-person mode, first raise the NOTE cargo bed, support with the rod and pull the stored rear seat and place it onto the engine.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147

MAINTENANCE AND ADJUSTMENT
85
j
Engine Oil
In order for the engine to function properly, main-
tain the engine oil at the proper level, and change the
oil and oil filter in accordance with the Periodic Main-
tenance Chart. Not only do dirt and metal particles
collect in the oil, but the oil itself loses its lubricative
quality if used too long.
WARNING
Vehicle operation with insufficient, deterio-
rated, or contaminated engine oil will cause
accelerated wear and may result in engine
seizure, accident, and injury. Check the oil
level before each use and change the oil and
filter according to the periodic maintenance
chart in the owner’s manual.
Oil Level Inspection
If the oil has just been changed, start the engine
and run it for several minutes at idle speed. This
fills the oil filter with oil. Stop the engine, then wait
several minutes until the oil settles.
NOTICE
Racing the engine before the oil reaches ev-
ery part can cause engine damage.
If the vehicle has just been used, wait several min-
utes for all the oil to drain down.
Park the vehicle on level ground.
Pull up the dipstick out of the dipstick tube, wipe it
dry, and insert it into the tube securely.
NOTE
ż
It is necessary to insert the dipstick with its groove
mark facing upwards to measure the correct
amount of oil.
A. Dipstick
B. Groove Mark
C. Rear Seat
NOTE
ż
If the vehicle is in 2-person mode, first raise the
cargo bed, support with the rod and pull the stored
rear seat and place it onto the engine.