2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Owners Manual - Page 97

2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD Manual

Get 2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD PDF manuals and user guides View all 2010 Kawasaki MULE 4010 Trans4x4 Realtree APG HD manuals

Page 97 highlights

MAINTENANCE AND ADJUSTMENT 95 WARNING The exhaust system can get extremely hot during normal operation and cause serious burns. To avoid a serious burn, never touch a hot muffler or exhaust pipe during oil draining. the cargo bed and support it with the rod. • Lift • Remove the filler plug. Tightening Torque Drain Plug: 15 N·m (1.5 kgf·m, 11 ft·lb) Transmission Case Oil Type API "GL-5" Hypoid gear oil above 5°C (41°F) SAE 90 below 5°C (41°F) SAE 80 Transmission Case Oil Capacity 2.5 L (2.6 US qt) j WARNING Oil on tires can make them slippery which can cause an accident and injury. When draining or filling the transmission case, be careful that no oil gets on the tires or rims. Clean off any oil that inadvertently gets on them with soap and water. Transmission case oil is a toxic substance. Dispose of used oil properly. Contact your local authorities for approved disposal methods or possible recycling. the oil has completely drained out, install the • After drain plug with its gasket. Tighten it to the spec- • Install the filler plug. • ified torque. If the gasket is damaged, replace it with a new one. Fill the transmission case up to the "H" (High) line on the dipstick with a high quality oil as specified in the table.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
MAINTENANCE AND ADJUSTMENT
95
j
WARNING
The exhaust system can get extremely hot
during normal operation and cause serious
burns. To avoid a serious burn, never touch
a hot muffler or exhaust pipe during oil drain-
ing.
•
Lift the cargo bed and support it with the rod.
•
Remove the filler plug.
WARNING
Oil on tires can make them slippery which
can cause an accident and injury.
When
draining or filling the transmission case, be
careful that no oil gets on the tires or rims.
Clean off any oil that inadvertently gets on
them with soap and water.
Transmission
case oil is a toxic substance.
Dispose of
used oil properly.
Contact your local authorities for approved
disposal methods or possible recycling.
•
After the oil has completely drained out, install the
drain plug with its gasket. Tighten it to the spec-
ified torque. If the gasket is damaged, replace it
with a new one.
•
Fill the transmission case up to the “H” (High) line
on the dipstick with a high quality oil as specified
in the table.
Tightening Torque
Drain Plug: 15 N·m (1.5 kgf·m, 11 ft·lb)
Transmission Case Oil Type
API “GL-5” Hypoid gear oil
above 5°C (41°F) SAE 90
below 5°C (41°F) SAE 80
Transmission Case Oil Capacity
2.5 L (2.6 US qt)
•
Install the filler plug.