2010 Kawasaki Vulcan 900 Classic LT Owners Manual - Page 29
2010 Kawasaki Vulcan 900 Classic LT Manual
Page 29 highlights
GENERAL INFORMATION 27 : When the headlight is on high beam, the high beam indicator light is lit. : When the turn signal switch is pushed to left or right, the turn signal indicator light flashes on and off. : The oil pressure warning light goes on whenever the oil pressure is dangerously low or the ignition switch is in the ON position with the engine not running, and goes off when the engine oil pressure is high enough. Refer to the Maintenance and Adjustment chapter for more detailed engine oil information. : The warning light goes on whenever the coolant temperature rises to 120°C (248°F) or higher when the motorcycle is in operation. If it stays on, stop the engine and check the coolant level in the reserve tank after the engine cools down. FI: The fuel injection (FI) warning light goes on when the ignition key is turned to "ON" and goes off soon after ensuring that its circuit functions properly. The warning light also goes on whenever the troubles occur in digital fuel injection system (DFI). If the warning light comes on, have the DFI system checked by an authorized Kawasaki dealer. : The fuel level indicator light goes on when approximate 3.0 L (0.8 US gal) of fuel remains. Refuel at the earliest opportunity when the fuel level indicator light comes on with the engine running. When vehicle stands with Side Stand, Fuel Level Indicator Light cannot show the amount of fuel in the fuel
![](/manual_guide/autos/2010-kawasaki-vulcan-900-classic-lt-owners-manual-7d4b76a/29.png)