1996 Lexus ES 300 Owners Manual - Page 92

1996 Lexus ES 300 Manual

Page 92 highlights

AIR CONDITIONING AND AUDIO Displaying the outside temperature - When you push the (OUTSIDE TEMP) button, the temperature display shows the outside temperature for about 5 seconds, then returns to the current set temperature or turns off. The temperature display ranges from -30°C (-22°F) up to 50°C (122°F). (c) Operating tips S Make sure the air inlet grilles in front of the windshield are not blocked by leaves or other obstructions. vents. (See "Side vents" and "Lower vent".) S If air flow control is not satisfactory, check the dashboard S To help cool down the interior after parking in the hot sun, drive for the first few minutes with the windows open. After the excess heat has blown away, close the windows. S When driving on dusty roads, close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake control button be left to the OUTSIDE AIR mode and the fan speed control button be pressed to anywhere except the "OFF" button. S If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake control button be temporarily pressed in to the RECIRCULATED AIR mode, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior. (b) Windshield defogging and defrosting See "(a) Climate control" for details on each button. To remove interior fog on the windshield - Push in the (FRONT WINDSHIELD) button. To remove frost or exterior fog on the windshield - 1. Place the temperature control knob at the maximum temperature. 2. Push the (FRONT WINDSHIELD) button. (FAN) 3. Push the right side of the fan speed control button to set the fan speed at the maximum speed. 84

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215

AIR CONDITIONING AND AUDIO
84
Displaying the outside temperature –
When you push the
(OUTSIDE TEMP) button, the
temperature display shows the outside temperature for
about 5 seconds, then returns to the current set temperature
or turns off. The temperature display ranges from –30
°
C
(–22
°
F) up to 50
°
C (122
°
F).
(b)
Windshield defogging and defrosting
See “(a) Climate control” for details on each button.
To remove interior fog on the windshield –
Push in the
(FRONT WINDSHIELD) button.
To remove frost or exterior fog on the windshield –
1.
Place the temperature control knob at the maximum
temperature.
2.
Push the
(FRONT WINDSHIELD) button.
3.
Push the right side of the fan speed control
(FAN)
button to set the fan speed at the maximum speed.
(c)
Operating tips
S
Make sure the air inlet grilles in front of the windshield are
not blocked by leaves or other obstructions.
S
If air flow control is not satisfactory, check the dashboard
vents. (See “Side vents” and “Lower vent”.)
S
To help cool down the interior after parking in the hot sun,
drive for the first few minutes with the windows open. After
the excess heat has blown away, close the windows.
S
When driving on dusty roads, close all windows. If dust
thrown up by the vehicle is still drawn into the vehicle after
closing the windows, it is recommended that the air intake
control button be left to the OUTSIDE AIR mode and the
fan speed control button be pressed to anywhere except
the “OFF” button.
S
If following another vehicle on a dusty road, or driving in
windy and dusty conditions, it is recommended that the air
intake control button be temporarily pressed in to the
RECIRCULATED AIR mode, which will close off the
outside passage and prevent outside air and dust from
entering the vehicle interior.