1998 Lexus LX 470 Owners Manual - Page 210

COMFORT ADJUSTMENT 16X182b " 1 Bolt 2 Anchor bracket 3 Spacer 3. Insert a 15 mm (0.6 in.) spacer, and tighten down the anchor bracket for your child restraint system with a bolt. Torque the bolt to 16.5 - 24.7 N·m (1.68 -2.52 kgf·m, 12.2 - 18.2 ft·lbf.). To comply with Canada Motor Vehicle Safety Standards, vehicles sold in Canada are provided with a bracket set in the glovebox, designed for use with any of three anchor locations shown in the illustration. DRIVING POSITION MEMORY SYSTEM The micro computer can memorize the position of the driver's seat, and the positions of the tilt and telescopic steering, and outside rear view mirrors. Two different driving position profiles can be entered into the computer's memory. Recording a driving position in the computer's memory can only be done when the ignition key is in the "ON" position and the shift lever is in the "P" position. Setting a driving position 16X162 1. Adjust the driver's seat , tilt and telescopic steering and 192 outside rear view mirrors to the desired position. 2. While pushing the "SET" button, push button "1" or "2" until the signal beeps.