2005 Lexus ES 330 Owners Manual - Page 1

GAS STATION INFORMATION D Fuel selection: Select unleaded gasoline with an Octane Rating of 87 (Research Octane Number 91) or higher. For improved vehicle performance, the use of premium unleaded gasoline with an Octane Rating of 91 (Research Octane Number 96) or higher is recommended. D Fuel tank capacity: 70 L (18.5 gal., 15.4 Imp. gal.) D Engine oil: "Toyota Genuine Motor Oil" or equivalent Oil grade: API grade SL "Energy−Conserving" or ILSAC multigrade engine oil Recommended oil viscosity: SAE 5W−30 Oil capacity: L (qt., Imp. qt.) Drain and refill With filter 4.7 (5.0, 4.1) Without filter 4.5 (4.8, 4.0) See page 351 for detailed information. D Engine coolant: Capacity: 9.2 L (9.7 qt., 8.2 Imp. qt.) Coolant type - "Toyota Super Long Life Coolant" or similar high quality ethylene glycol based non−silicate, non−amine, non−nitrite, and non−borate coolant with long−life hybrid organic acid technology (Coolant with long−life hybrid organic acid technology is a combination of low phosphates and organic acids.) Do not use plain water alone. For checking the engine coolant, see page 355. D Automatic transaxle: Fluid type - Toyota Genuine ATF Type T−IV See page 360 for detailed information. D Tire information: See pages 366 through 386 for detailed information. D Tire inflation pressure: cold tires kPa (kgf/cm2 or bar, psi) Tire size: P215/60R16 94V Front tires ...200 (2.0, 29) Rear tires ...200 (2.0, 29) For sustained high speeds above 160 km/h (99 mph), in countries where such speeds are permitted by law, add 40 kPa (0.4 kgf/cm2 or bar, 6 psi) to the front tires and rear tires, but never exceed the maximum cold tire inflation pressure molded on the tire sidewall. Tire size: P215/55R17 93V Front tires ...210 (2.1, 30) Rear tires ...210 (2.1, 30) For sustained high speeds above 160 km/h (99 mph), in countries where such speeds are permitted by law, add 30 kPa (0.3 kgf/cm2 or bar, 4 psi) to the front tires and rear tires, but never exceed the maximum cold tire inflation pressure molded on the tire sidewall. See page 362 or 363 for detailed information.