2006 Lexus RX 400h Owners Manual - Page 142

GAUGES, METERS AND SERVICE REMINDER INDICATORS (4) (U.S.A. only) Resetting the system The system must be reset after the engine oil replacement. Reset the system by the following procedure. 1. Turn the ignition key to the "LOCK" position with the odometer reading shown. For details, see "Odometer and trip meter" on page 99 in this Section. 2. Turn the ignition key to the "ON" position while holding down the "ODO/TRIP" button. A message "MAINT REQD RESET MODE" will appear on the display. 3. Hold down the button at least 5 seconds. A message "COMPLETE" will appear and a beep will sound. This message is to remind the driver to change the engine oil. If the driving range after the previous oil change reaches to 8000 km (5000 miles), the message appears with the master warning light and warning tone when the ignition is on. The message stays on with the ignition on. If the message appears, change the engine oil as soon as possible. The system must be reset after the engine oil change. See "Resetting the system" below for the procedure to reset the system. (5) This message is to remind the driver that the washer fluid level is low. If the washer fluid level is low, the message appears with the master warning light and warning tone when the ignition is on. If the message appears, fill the washer tank as soon as possible. For instructions, see "Adding washer fluid" on page 593. 106