1997 Lincoln Mark VIII Owner's Manual - Page 260

3. Remove the high beam dust cap by rotating counterclockwise 1/4 turn. Pull back to exposes wiring and connector. Remove the bulb connector by pulling rearward to free it from the lamp assembly. Remove the electrical connector by pulling off the bulb base. 4. 5. Installing the high beam headlamp bulb 1. Headlamp bulb removal Removing the high beam headlamp bulb 1. 2. Make sure that the headlamp switch is in the OFF position. Lift the hood, remove the sight shield above the headlamp and find the bulb in the headlamp socket. 3. 2. Push the electrical connector into the rear of the plastic base of the bulb until it snaps, locking it into position. Insert the glass envelope of the bulb into the lamp assembly socket while aligning the locking tabs. Rotate the bulb 1/4 turn to lock. 255