2010 Lincoln Town Car Owner Guide 1st Printing - Page 23
2010 Lincoln Town Car Manual
Page 23 highlights
Instrument Cluster 10. The compass is now calibrated. OIL LIFE START VALUE PRESS SELECT TO CHANGE Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. To reset the oil monitoring system to 100% after each oil change (approximately 7,500 miles [12,000 km] or six months), perform the following: 1. Press and hold the RESET control for two seconds and release. Oil life is set to 100% and "OIL LIFE XXX% HOLD RESET IF NEW OIL" is displayed. 2. Press and hold the RESET control for three seconds and release. Oil life is set to 100% and "OIL LIFE START VALUE SET TO XXX%" is displayed. PARK AID (Reverse sensing system-if equipped) This feature sounds a warning tone to warn the driver of obstacles near the rear bumper, and functions only when R (Reverse) gear is selected. 1. Before you disable/enable the reverse sensing system feature, put the vehicle in R (Reverse). 2. Press RESET to turn the park aid ON or OFF. System warnings System warnings alert you to possible problems or malfunctions in your vehicle's operating systems. In the event of a multiple warning situation, the message center will cycle the display to show all warnings by displaying each one for four seconds. The message center will display the last selected feature if there are no more warning messages. This allows you to use the full functionality of the message center after you acknowledge the warning by pressing the RESET control and clearing the warning message. Warning messages that have been reset are divided into three categories: • They cannot be reset until the condition is corrected. • They will reappear on the display 10 minutes from the reset. • They will not reappear until an ignition off-on cycle has been completed. This acts as a reminder that these warning conditions still exist within the vehicle. 23 2010 Town Car (tow) Owners Guide, 1st Printing USA (fus)