2010 Lincoln Town Car Owner Guide 1st Printing - Page 271
2010 Lincoln Town Car Manual
Page 271 highlights
Item Windshield washer fluid Fuel tank 1 Capacity Fill to line on reservoir 19.0 gallons (71.9L) - - Motorcraft Premium Windshield Washer Concentrate ZC-32-A / WSB-M8B16-A2 Ford part name Ford part number / Ford specification Use only brake fluids certified to meet Ford specifications. 2 Add the coolant type originally equipped in your vehicle. 2010 Town Car (tow) Owners Guide, 1st Printing USA (fus) Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage. Refer to scheduled maintenance information to determine the correct service interval. Add 4.0 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axles only. Service refill capacities are determined by filling the rear axle 1/4 inch to 1/2 inch (6 mm to 13 mm) below the bottom of the filler hole. Rear axles are considered lubricated for life when the vehicle is used for normal service. For severe duty requirements, see Exceptions and Special Operating Conditions in scheduled maintenance information. 8 7 6 5 4 Maintenance and Specifications 3 271