2011 Lincoln Navigator Owner Guide 1st Printing - Page 110
2011 Lincoln Navigator Manual
Page 110 highlights
Locks and Security Sounding a panic alarm Press to activate the alarm. The horn will sound and the turn lamps will flash for a maximum of three minutes. Press again or turn the ignition to the on position to deactivate, or wait for the alarm to time out in three minutes. Note: The panic alarm will only operate when the ignition is in the off position. Memory feature (seat, mirrors, adjustable pedals and steering column) The transmitter allows you to recall the memory seat/power mirrors/adjustable pedals/steering column feature. to automatically move the seat, power mirrors, adjustable Press pedals and steering column to the desired memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the key is in the ignition (if easy entry feature is enabled). Programming memory feature to transmitter To activate this feature: 1. Move the driver seat, power mirrors, adjustable pedal and steering column to the desired positions using the associated controls. 2. Press and hold the control button 1 for five seconds. A tone will be heard after about two seconds confirming memory position has been set. Continue to hold until a second tone is heard after five seconds. 3. Within three seconds press the 5. Press the . . 4. A tone will be heard when the transmitter programming is complete. 6. Repeat this procedure for memory 2 and another transmitter if desired. Deprogramming memory feature from transmitter To deactivate this feature: 1. Press and hold either the 1 or 2 control on the driver's door for five seconds. A tone will be heard after 11⁄2 seconds when the memory store is done, continue to hold until a second tone is heard after five seconds. 110 2011 Navigator (nav) Owners Guide, 1st Printing USA (fus)