2015 Lincoln MKZ Owner Manual Printing 1 - Page 74
2015 Lincoln MKZ Manual
Page 74 highlights
Locks You can operate the keypad with the factory-set 5-digit entry code. The code is located on the owner's wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory-set code. 2. Press 1·2 on the keypad within five seconds. 3. Enter your personal 5-digit code. You must enter each number within five seconds of each other. 4. Press 1·2 on the keypad to save personal code 1. The doors will lock then unlock to confirm that programming was successful. To program additional personal entry codes, repeat Steps 1-3, then for Step 4: • • press 3·4 to save personal code 2 press 5·6 to save personal code 3 • • press 7·8 to save personal code 4 press 9·0 to save personal code 5. You may also program a personal entry code through the MyLincoln Touch system. See Settings (page 387). Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you have set your own personal code. Recalling Memory Positions The programmed entry codes will recall driver memory positions as follows Entry code 1 will recall driver 1 memory positions. Entry code 2 will recall driver 2 memory positions. Entry code 3 will recall driver 3 memory positions. E138637 You can use the keypad to: • lock or unlock the doors • recall memory seat and mirror positions • program and erase personal entry codes • arm and disarm the anti-theft alarm • release the trunk. Note: The keypad will not operate a power decklid. Note: Personal entry codes 4 and 5 will not recall memory positions. 71 MKZ (), enUSA