2000 Mercedes ML-Class Owner's Manual - Page 236
2000 Mercedes ML-Class Manual
Page 236 highlights
Checking engine oil level Wipe oil dipstick clean prior to checking the engine oil level. Fully insert dipstick in tube, and remove after three seconds to obtain accurate reading. Oil level must be between the lower (min) and upper (max) mark of the dipstick. Fill quantity between upper and lower dipstick marking, the level is approximately 2.1 US qt (2.0 l). Do not overfill the engine. Excessive oil must be drained or siphoned. It could cause damage to engine and catalytic converter not covered by the Mercedes-Benz Limited Warranty. See page 224 for low engine oil level warning. Note: See page 89 for engine oil level indicator. 1 Oil dipstick 2 Oil filler cap To check the engine oil level, park vehicle on level ground, with engine at normal operational temperature. Check engine oil level approximately 5 minutes after stopping the engine, allowing for the oil to return to the oil pan. Engine compartment Instruments and controls Operation Driving 233 Instrument cluster display Practical hints Car care Technical data Index