2002 Mercedes G-Class Owner's Manual - Page 326

Important! 5. Start engine of the vehicle with the charged battery and run at high idle. Make sure the cables are not on or near pulleys, fans, or other parts that move when the engine is started. Allow the discharged battery to charge for a few minutes. Start engine of the disabled vehicle in the usual manner. 6. After the engine has started, remove jumper cables by exactly reversing the above installation sequence, starting with the last connection made first. When removing each clamp, make sure that it does not touch any other metal or the other clamp while the other end is still attached. Notes: If engine does not run after several unsuccessful starting attempts, have it checked at the nearest authorized Mercedes-Benz Light Truck Center. Excessive unburned fuel may damage the catalytic converter. Jump starting Instruments and controls Operation Driving 323 Instrument cluster display Practical hints Car care Technical data Index