2003 Mercedes CLK-Class Owner's Manual - Page 306
2003 Mercedes CLK-Class Manual
Page 306 highlights
Practical hints Where will I find...? Vehicle jack Warning! The vehicle jack is stored in the space underneath the trunk floor together with the vehicle tool kit in the vehicle tool kit storage well casing. G 3 Arrow 4 Minispare wheel 5 Vehicle tool kit storage well casing 6 Vehicle tool kit Wheel wrench Vehicle jack The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets built into both sides of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always firmly set parking brake and block wheels before raising vehicle with jack. Do not disengage parking brake while the vehicle is raised. Be certain that the jack is always vertical (plumb line) when in use, especially on hills. Always try to use the jack on a level surface. Make sure that the jack arm is fully seated in the jack take-up bracket. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. Remove the vehicle jack from its compartment. Push the crank handle up. i Arrow 3 on vehicle tool kit storage well casing 5 must point in the direction of travel. Otherwise you cannot place the storage well casing on top and secure the Minispare wheel with retaining screw 1 ( page 305). 306
![](/manual_guide/autos/2003-mercedes-clkclass-owners-manual-e7f440a/306.png)