2003 Mercedes CLK-Class Owner's Manual - Page 71

Safety and Security Occupant safety Child seat anchors - "LATCH" type This vehicle is equipped with two "LATCH" (Lower Anchors and Tethers for CHildren) type anchors (at each of the outer rear seats) for the installation of a "LATCH" child seat with matching anchor fittings. If child seats are not installed, the "LATCH" anchors can be folded back between the seat cushion and the seat backrest. To fold anchors back Press down button 2 on each anchor and return the anchor to its catch. i Non-"LATCH" type child seats may also be used and can be installed using the vehicle's seat belt system. Install child seat according to the manufacturer's instructions. Grip inner side of anchors 1 and fold forward until they lock in place. Install child seat according to the manufacturer's instructions. Warning! G i The child seat must be firmly attached in the right and left side anchors. Children too big for child restraint systems must ride in back seats using regular seat belts. Position shoulder belt across chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper belt positioning for children over 41 lbs. until they reach a height where a lap/shoulder belt fits properly without a booster. 71